PATENTED Shaft Stabilization

PACKRYT® ORM

Bearing with O-Ring

Mechanical seals are ultra-precision devices with seal faces carefully lapped to less than 1.8 microns. This type of precision is expensive and downtime, due to seal face parting and failure, is even more costly.

DOWNLOAD INFORMATION

Save Face. Let us bear the load.

Protect seal faces from failure

SealRyt’s patented bearing technology augments Mechanical Seal performance by:

  • Minimizing radial shaft movement from run out or misalignment
  • Acting as the replaceable wear surface
  • Transferring load and wear from the seal faces to the bearing
  • Allowing the mechanical seal faces to remain in close contact and do their job
  • Aiding in vibration dampening

SEALRYT® – INSURANCE  FOR YOUR CRITICAL MECHANICAL SEALS

The root cause of most

rotating equipment failure

is shaft movement.

SealRyt’s patented technology has proven its ability to seal, support shafts, and increase reliability.

BEFORE: Shaft movement in the stuffing box is unrestrained and is the root cause of equipment and sealing failures.

AFTER: The PackRyt Bearing System virtually eliminates shaft movement which increases both equipment and sealing reliability.

Case StudIES

Dissolving Tank Agitators

A PackRyt® Sealing System was installed on 4 hard coated shaft tank agitator units and they have been running trouble free for over 2 years.

Previously these units had shaft change outs every year at a cost of approximately $80,000.00.

Stock Pumps

A PackRyt® Sealing System was installed on a 3175 stock pump having extreme leakage and maintenance issues. The PackRyt® eliminated the problems. All pumps and agitators on the paper machine and the pulp dryer are now being considered for change out.

Fiber Line Equipment

A chip chute pump was being re-packed every 2 months and now with the PackRyt® Sealing System installed it has one annual packing change. The bearing has had a life span of over 5 years.

ASK ABOUT YOUR APPLICATION

Have a question about protecting your mechanical seals ?

CONTACT US.

64 Servistar Industrial Way

Westfield, MA 01085

Phone: 413-564-5202

Fax: 413-564-5203

MADE IN THE U.S.A.

Designed &
Manufactured in Westfield, MA