A: Good Question. The answer is variable. The key to effective sealing is creating an individual solution for each application. Because in most cases we are custom making the solution the price can vary and depends on 3 variables – length of the bearing to properly retrofit your stuffing box, type of polymer to be used, type of packing to be used. In a broad sense our products cost more than plain packing and less than mechanical seals.
A: No, bushings are made from lesser materials , such as PTFE, and serve as non-contact spacers. Contact with a shaft fails bushings very quickly. Our patented PackRyt® Systems utilize various grades of SealRyt’s own bearing polymers and literally demand contact. This contact is what limits shaft movement to a few thousandths. Eliminating shaft movement is crucial to increasing MTBF.
Visit our Bushing vs Bearing page for more information.
A: Spiral Trac is a bushing that spaces packing off the bottom of the box and directs water flow to counter process fluids. It does not survive shaft contact.
A: Very close. Run-out allowance is usually less than what the factory roller bearings allow.
A: Please call us and we can look up part numbers for partial orders based on SealRyt's quote number. Call: 413-564-5202
A: Seal water to process depends on process pressure to seal water pressure differential. It also depends on clearances between the bearing and shaft. The bearing only needs to be kept clean in the contact area which requires only a thin film of water, air, nitrogen, glycol, etc. The reduction of flush media is inherent in the technology.
A: SealRyt® selects the proper polymer for your application and varies according to chemistry and thermal conditions. Seal Ryt develops its own polymer and utilizes all known base resins plus various admixtures to do so.
Q: How tight should I tighten the gland?
A: It depends. Please contact our Technical Services Division or see our Resources page.
Q: What can you use for a flush medium?
A: Water, air, nitrogen, and more. We recommend calling and talking with one of our engineers. Oil and petroleums are not recommended.
READ MORE TESTIMONIALS
PREMIUM MECHANICAL PACKING
CUSTOM SHAFT BEARINGS
MILLED GLAND FOLLOWERS
ROTATING SHAFT SEALING EXPERTS
"Your product has performed as advertised and the service by your team has exceeded what was expected. Great job by everyone at SealRyt."
– Steve C., Maintenance/Shutdown Planner, Pulp & Paper Industry
"A good product, in the right application, that has served the mill well..."
– Andy B, Maintenance Supervisor
"The PackRyt system works better than every other option that we tried."
– Pulp Mill Supervisor, Oklahoma
Copyright © 2017 SealRyt® Corporation.
MADE IN THE U.S.A.
Manufactured in Westfield, MA