PATENTED Shaft Stabilization

PACKRYT® BRG

Bearing SEALING SYSTEM

The PackRyt® Bearing Sealing System is a unique stuffing box sealing arrangement that incorporates a bearing custom made to close tolerances for your application. This replaces outdated braided-packing-only  configurations. Our system brings shafts into concentricity and keeps them there, significantly increasing sealing reliability.

PATENTED TECHNOLOGY

Advantages

  • Machined to close-clearance, the bearing stabilizes the shaft and prevents movement
  • Cavitation caused deflection is minimized
  • Results in minimal friction to sleeve/shaft
  • Minimal clearance sharply throttles solids
  • Little, or in some cases, no leakage from gland follower to atmosphere
  • Eliminates need to constantly adjust packing
  • As few as two rings of packing required
  • High performance, ultra pure heat conductive sealing rings can virtually eliminate sleeve/shaft wear

High-performance thermoplastic bearing block

  • Tremendous compressive strength
  • Impervious to most chemicals.
  • Virtually no dimensional growth up to 260ºC
  • Split, pinned, drilled and tapped for easy installation and removal.
  • Available as split bearing with lantern ring groove (Product Name: BLR).

The root cause of most

rotating equipment failure

is shaft movement.

SealRyt’s patented technology has proven its ability to seal, support shafts, and increase reliability.

BEFORE: Shaft movement in the stuffing box is unrestrained and is the root cause of equipment and sealing failures.

AFTER: The PackRyt Bearing System virtually eliminates shaft movement which increases both equipment and sealing reliability.

Case StudIES

Dissolving Tank Agitators

A PackRyt® Sealing System was installed on 4 hard coated shaft tank agitator units and they have been running trouble free for over 2 years.

Previously these units had shaft change outs every year at a cost of approximately $80,000.00.

Stock Pumps

A PackRyt® Sealing System was installed on a 3175 stock pump having extreme leakage and maintenance issues. The PackRyt® eliminated the problems. All pumps and agitators on the paper machine and the pulp dryer are now being considered for change out.

Fiber Line Equipment

A chip chute pump was being re-packed every 2 months and now with the PackRyt® Sealing System installed it has one annual packing change. The bearing has had a life span of over 5 years.

ASK ABOUT YOUR APPLICATION

Have a question about stuffing box sealing ?

CONTACT US.

DOWNLOAD INFORMATION

64 Servistar Industrial Way

Westfield, MA 01085

Phone: 413-564-5202

Fax: 413-564-5203

MADE IN THE U.S.A.

Designed &
Manufactured in Westfield, MA