EXTENDED SELECTION

PuMP AND STUFFING BOX ACCESSORIES

SealRyt® offers more traditional stuffing box sealing solutions including lantern rings and wedge sets. Both options are custom made for your application and pair perfectly with SealRyt's® premium mechanical packing products to ensure a reliable stuffing box seal.

Advantages

  • Machined to close-clearance, the bearing stabilizes the shaft and prevents movement
  • Cavitation caused deflection is minimized
  • Results in minimal friction to sleeve/shaft
  • Minimal clearance sharply throttles solids, which allows the low-flush to keep them out of the shaft area
  • Flush flow remains constant
  • Cost effective
  • High performance, ultra pure heat conductive sealing rings can virtually eliminate sleeve/shaft wear

High-performance thermoplastic bearing block

  • Tremendous compressive strength
  • Impervious to most chemicals.
  • Virtually no dimensional growth up to 260ºC

The root cause of most

rotating equipment failure

is shaft movement.

SealRyt’s patented technology has proven its ability to seal, support shafts, and increase reliability.

BEFORE: Shaft movement in the stuffing box is unrestrained and is the root cause of equipment and sealing failures.

AFTER: The PackRyt Bearing System virtually eliminates shaft movement which increases both equipment and sealing reliability.

Case StudIES

Dissolving Tank Agitators

A PackRyt® Sealing System was installed on 4 hard coated shaft tank agitator units and they have been running trouble free for over 2 years.

Previously these units had shaft change outs every year at a cost of approximately $80,000.00.

Stock Pumps

A PackRyt® Sealing System was installed on a 3175 stock pump having extreme leakage and maintenance issues. The PackRyt® eliminated the problems. All pumps and agitators on the paper machine and the pulp dryer are now being considered for change out.

Fiber Line Equipment

A chip chute pump was being re-packed every 2 months and now with the PackRyt® Sealing System installed it has one annual packing change. The bearing has had a life span of over 5 years.

ASK ABOUT YOUR APPLICATION

Have a question about stuffing box sealing ?

CONTACT US.

64 Servistar Industrial Way

Westfield, MA 01085

Phone: 413-564-5202

Fax: 413-564-5203

MADE IN THE U.S.A.

Designed &
Manufactured in Westfield, MA